Siemens SINAMICS S120 System Manual page 161

Article number
Sound pressure level
4)
L (1 m) at 50/60 Hz
pA
Line/load connection
Max. connection cross-sections
- Line connection (U1, V1, W1)
- DC-link connection (DCP, DCN)
- PE connection PE1
- PE connection PE2
Max. cable length
(total of all motor cables and DC link)
- Shielded
- Unshielded
Degree of protection
Dimensions
- Width
- Height
- Depth
Frame size
Weight
Recommended fuse
5)
- Number per phase (connected in parallel)
- Rated current
- Frame size acc. to IEC 60269
Minimum short-circuit current
UL approval is only applicable for the restricted voltage range 380V -10% (-15 % < 1 min) ... .3 AC 480 +10 %, which,
1)
for this reason, is specified together with the UL approval on the type plate.
The continuous permissible DC link voltage is 750 V. Briefly up to 800 V is possible (is permissible a maximum of 5
2)
times per hour for 1 minute).
The specified power loss is the maximum value for a 100% utilization level. The value in normal operation is lower.
3)
Total sound pressure level of Active Interface Module and Active Line Module.
4)
To achieve a UL-approved system, it is absolutely essential to use the fuse types specified in the table.
5)
Minimum current required for reliable triggering of the protective devices.
6)
Grid infeed
System Manual, 04/2015, A5E03347436A
8.4 Air-cooled Active Line Modules for the grid infeed, chassis format
6SL3330– 7TE35–
dB(A)
mm²
mm²
mm²
mm²
m
m
mm
mm
mm
kg
A
6)
7TE41–
0AA4 0AA4
69 / 73 71 / 73
Flat connector for screw
M10 M12
2 x 240 6 x 240
2 x 240 busbar
2 x 240 1 x 240
2 x 240 3 x 240
2700 3900
4050 5850
IP20 IP00
326 704
1533 1480
545 550
GX JX
136 450
3NE1436-2 3NE1436-2
1 2
630 630
3 3
8000 16000
Device overview
7TE41–
4AA4
71 / 73
M12
6 x 240
busbar
1 x 240
3 x 240
3900
5850
IP00
704
1480
550
JX
450
3NE1448-2
2
850
3
21000
161