Preface - Siemens SINAMICS S120 System Manual

Preface

Objective
This document describes SINAMICS units and functions which enable power to be fed into a
power grid or to an island grid. Reference is made only to the hardware components
required for infeed and the necessary software functions/options. In some instances, the
hardware differs from the conventional, widely used SINAMICS infeed and regenerative
feedback units for industrial applications. The software offers options to provide additional
functionality.
Detailed information on general hardware, software functions and engineering
information/instructions are described in separate documentation and can obtained from the
regional SIEMENS office and used as supplementary information for this documentation.
Target group
This document is used by system integrators and Original Equipment Manufacturers (OEMs)
to operate, parameterize and commission the SINAMICS devices with the associated
software functions for power infeed.
Validity
The document applies to the following devices:
● Active Line Modules, booksize format with article number ... AA3
● Active Line Modules, chassis format with article number ... AA4
Further reference documents
● SINAMICS S120/S150 List Manual
● SINAMICS S120 Commissioning Manual
● SINAMICS S120 Function Manual Drive Functions
● SINAMICS S120 Equipment Manual for Chassis Power Units
● SINAMICS S120 Equipment Manual for Booksize Power Units
● SINAMICS LV Configuration Manual
Internet address
Up-to-date information about our products can be found on the Internet at:
http://www.siemens.com (http://www.siemens.com)
You can find information on SINAMICS at: www.siemens.com/sinamics
(www.siemens.com/sinamics)
Application descriptions can be found at: Application and tools
(https://support.industry.siemens.com/cs/ww/en/ps/ae)
Grid infeed
System Manual, 04/2015, A5E03347436A
5