Siemens SIMATIC S5 Manual page 2

SIMATIC
Safety This manual contains notices which you should observe to ensure your own personal safety,
guidelines
as well as to protect the product and connected equipment. These notices are highlighted in
the manual by a warning triangle and are marked as follows according to the level of danger:
Gefahr
!
indicates that death, severe personal injury or substantial property damage
will result if proper precautions are not taken.
Warnung
!
indicates that death, severe personal injury or substantial property damage
can result if proper precautions are not taken.
Vorsicht
!
indicates that minor personal injury or property damage can result if proper
precautions are not taken.
Hinweis
draws your attention to particularly important information on the product, handling the pro-
duct or to a particular part of the documentation.
Qualified personnel Only qualified personnel should be allowed to install and work on this equipment. Qualified
persons are defined as persons who are authorized to commission, to ground and to tag
equipment, systems and circuits in accordance with established safety practices and stan-
dards.
Correct usage Note the following:
Warnung
!
This device may only be used for the applications described in the catalog or technical
description, and only in connection with devices or components from other manufacturers
which have been approved or recommended by Siemens.
This product can only function correctly and safely if it is transported, stored and set up
carefully and correctly, and operated and maintained as recommended.
Copyright Siemens AG 1995 All Rights Reserved
The reproduction, transmission, or use of this document or its
contents is not permitted without express written authority. Offenders
will be liable for damages. All rights, including rights created by
patent grant or registration of a utility model or design, are reserved.
Siemens AG 1995 6ES5998-2AB24
and SINEC are registered trademarks of SIEMENS AG.
Disclaimer of Liability
We have checked the contents of this manual for agreement with the
hardware and software described. Since deviations cannot be
precluded entirely, we cannot guarantee full agreement. However, the
data in this manual are reviewed regularly and any necessary
corrections included in subsequent editions. Suggestions for
improvement are welcomed.
Technical data subject to change.