ABB ACSM1 Firmware Manual page 148

148
DI4
DI5
DI6
RO1
RO2
RO3
RO4
RO5
Running
Const
Pointer
33.18 BIT1 INVERT SRC
Selects the source bit whose inverted value is shown by
selections, see parameter
33.19 BIT2 INVERT SRC
Selects the source bit whose inverted value is shown by
selections, see parameter
33.20 BIT3 INVERT SRC
Selects the source bit whose inverted value is shown by
selections, see parameter
33.21 BIT4 INVERT SRC
Selects the source bit whose inverted value is shown by
selections, see parameter
33.22 BIT5 INVERT SRC
Selects the source bit whose inverted value is shown by
selections, see parameter
Parameters and firmware blocks
Digital input DI4 (as indicated by
Digital input DI5 (as indicated by
Digital input DI6 (as indicated by
Relay output RO1 (as indicated by
Relay output RO2 (as indicated by
Relay output RO3 (as indicated by
Relay output RO4 (as indicated by
Relay output RO5 (as indicated by
Bit 3 of 6.01 STATUS WORD 1
Constant and bit pointer settings (see
63).
FW block: None
33.17 BIT0 INVERT SRC.
FW block: None
33.17 BIT0 INVERT SRC.
FW block: None
33.17 BIT0 INVERT SRC.
FW block: None
33.17 BIT0 INVERT SRC.
FW block: None
33.17 BIT0 INVERT SRC.
2.01 DI STATUS, bit 3).
2.01 DI STATUS, bit 4).
2.01 DI STATUS, bit 5).
2.02 RO STATUS, bit 0).
2.02 RO STATUS, bit 1).
2.02 RO STATUS, bit 2).
2.02 RO STATUS, bit 3).
2.02 RO STATUS, bit 4).
(see page 120).
Bit pointer parameter
6.17 BIT INVERTED SW, bit 1. For the
6.17 BIT INVERTED SW, bit 2. For the
6.17 BIT INVERTED SW, bit 3. For the
6.17 BIT INVERTED SW, bit 4. For the
6.17 BIT INVERTED SW, bit 5. For the
on page