ABB ACSM1 Firmware Manual page 250

250
Code Fault
(fieldbus code)
0202 T3 OVERLOAD
(0x6100)
0203 T4 OVERLOAD
(0x6100)
0204 T5 OVERLOAD
(0x6100)
0205 A1 OVERLOAD
(0x6100)
0206 A2 OVERLOAD
(0x6100)
0207 A1 INIT FAULT
(0x6100)
0208 A2 INIT FAULT
(0x6100)
0209 STACK ERROR
(0x6100)
0210 JMU MISSING
(0xFF61)
0301 UFF FILE READ
(0x6300)
0302 APPL DIR CREATION
(0x6100)
0303 FPGA CONFIG DIR
(0x6100)
0304 PU RATING ID
(0x5483)
0305 RATING DATABASE
(0x6100)
Fault tracing
Cause
Firmware time level 3 overload
Note: This fault cannot be
reset.
Firmware time level 4 overload
Note: This fault cannot be
reset.
Firmware time level 5 overload
Note: This fault cannot be
reset.
Application time level 1 fault
Note: This fault cannot be
reset.
Application time level 2 fault
Note: This fault cannot be
reset.
Application task creation fault
Note: This fault cannot be
reset.
Application task creation fault
Note: This fault cannot be
reset.
Drive internal fault
Note: This fault cannot be
reset.
JMU Memory Unit is missing or
broken.
File read error
Note: This fault cannot be
reset.
Drive internal fault
Note: This fault cannot be
reset.
Drive internal fault
Note: This fault cannot be
reset.
Drive internal fault
Note: This fault cannot be
reset.
Drive internal fault
Note: This fault cannot be
reset.
What to do
Contact your local ABB representative.
Contact your local ABB representative.
Contact your local ABB representative.
Contact your local ABB representative.
Contact your local ABB representative.
Contact your local ABB representative.
Contact your local ABB representative.
Contact your local ABB representative.
Check that the JMU is properly installed. If the
problem persists, replace the JMU.
Contact your local ABB representative.
Contact your local ABB representative.
Contact your local ABB representative.
Contact your local ABB representative.
Contact your local ABB representative.