Panasonic AK-HRP1000G Operating Instructions Manual page 117

Item
ROP IP ADDRESS
ROP PORT
UPLOAD
ROP SUBNET MASK
UPLOAD
ROP DEFAULT GATEWAY
UPLOAD
MAC ADDRESS
NOTE
Performing [UPLOAD] after changing the settings will store the setting value changes to the internal memory. Perform [UPLOAD]
on each screen. The setting values stored to memory will be applied after the unit is restarted.
Sets the IP address of the unit.
The setting ranges are as follows.
(Factory default: 192.168.0.130)
1st octet: 1 to 223
2nd octet: 0 to 255
3rd octet: 0 to 255
4th octet: 1 to 254
However, the following addresses cannot be set.
Check the setting values during configuration.
0.*.*.*, *.*.*.0, *.*.*.255, 127.0.0.1
Class D address (224.0.0.0 to 239.255.255.255)
Class E address (240.0.0.0 to 255.255.255.255)
Sets the port of the unit.
Values from 35200 to 35599 can be set.
(Factory default: 35200)
When you press the [MENU] dial, the unit's IP address and port will be set.
Sets the subnet mask of the unit.
The follow values can be set.
(Factory default: 255.255.255.0)
1st octet: 128, 192, 224, 240, 248, 252, 254, 255
2nd octet: 0, 128, 192, 224, 240, 248, 252, 254, 255
3rd octet: 0, 128, 192, 224, 240, 248, 252, 254, 255
4th octet: 0, 128, 192, 224, 240, 248, 252, 254, 255
When you press the [MENU] dial, the unit's subnet mask will be set.
Sets the default gateway of the unit.
The setting ranges are as follows.
(Factory default: 192.168.0.1)
1st octet: 1 to 223
2nd octet: 0 to 255
3rd octet: 0 to 255
4th octet: 1 to 254
However, the following addresses cannot be set.
Check the setting values during configuration.
0.*.*.*, *.*.*.0, *.*.*.255, 127.0.0.1
Class D address (224.0.0.0 to 239.255.255.255)
Class E address (240.0.0.0 to 255.255.255.255)
When you press the [MENU] dial, the unit's default gateway will be set.
Display the unit's MAC address. (Display only)
- 117 -
Setting details
ROP menu