Scene File; Storing And Opening Scene Files - Panasonic AK-HRP1000G Operating Instructions Manual

Scene file

Storing and opening scene files

Storing scene files
You can register the data currently being operated as a scene file.
A. [STORE] button
B. [1/6], [2/7], [3/8], [4/EXT1], and [5/EXT2] buttons
C. Scene file page switching button
Operating procedure
1. Press the [STORE] button (A).
The button lights.
2. Press the desired scene number button (B).
The scene file page can be switched between [1] to [5] and [6] to [8] with the scene file page switching button (C).
When a button is pressed, the scene file storage starts.
The [STORE] button (A) turns off when storage ends.
NOTE
If adjustments are made after opening a scene file and then the store operation is performed, the state at that point in
time is stored in the scene file.
Opening a scene file
A. [1/6], [2/7], [3/8], [4/EXT1], and [5/EXT2] buttons
B. Scene file page switching button
Operating procedure
1. Press the desired scene number button (A).
The scene file page can be switched between [1] to [5] and [6] to [8]/[EXT1]/[EXT2] with the scene file page switching button (B).
The pressed button lights and the scene file opens.
To cancel opening of a scene file, press the button that is currently lit to turn it off.
The setting information that was temporarily saved before the scene file was opened is now restored, and the setting
state prior to opening the scene file is also restored.
If another number button is pressed, the scene file registered to the pressed button is newly opened.
C
B
B
A
- 37 -
Adjustment and settings
A