Front Panel 5 - Panasonic AK-HRP1000G Operating Instructions Manual

Front panel 5

1 [ND] indicator
2 [ND] setting buttons
3 [ND] display
4 [CC] indicator
5 [CC] setting buttons
6 [CC] display
7 [HEAD] button
8 [ECC] button
2 3 6 5
1 4 9 11
7 8 12
This indicator indicates the ND filter setting status.
Status displays
Lit green: Standard position set in the ROP menu.
Lit Orange: Updated from the standard position set in the ROP menu.
The standard position of the ND filter can be set in [ROP SETTING] > [STD POSITION
n
ND] in the ROP menu.
"STD POSITION ND" (see page 112)
Use the up and down buttons to select the ND filter setting.
When [HEAD] button off
Changes the ND filter setting.
When [HEAD] button lit
Only displays the ND filter position. (Switching is not possible.)
"ND filter" (see page 39)
This displays the ND filter position.
This indicator indicates the CC filter setting status.
Status displays
Lit green: Standard position set in the ROP menu.
Lit Orange: Updated from the standard position set in the ROP menu.
The standard position of the CC filter can be set in [ROP SETTING] > [STD POSITION
n
CC] in the ROP menu.
"STD POSITION CC" (see page 112)
Use the up and down buttons to select the CC filter setting.
When [HEAD] button off
Changes the CC filter setting.
When [HEAD] button lit
Only displays the CC filter position. (Switching is not possible.)
"CC filter" (see page 40)
When [ECC] button lit
When [ROP SETTING] > [ECC BTN CTRL] is set to "VAR" in the ROP menu, you can con-
figure the [ECC] > [COLOR TEMP] values in the ROP menu.
"COLOR TEMP" (see page 74)
When [ROP SETTING] > [ECC BTN CTRL] is set to "MEM" in the ROP menu, the setting
values registered to memory presets A to E in the [ECC] menu are recalled.
The recalled memory preset appears on the [CC] display.
In this state, the display will remain as the recalled memory preset, even if the [ECC] >
[COLOR TEMP] settings in the ROP menu are changed.
This displays the CC filter position.
Use this button to enable filter control on the camera side.
The [HEAD] button also lights when the camera's [FILTER LOCAL] switch is pressed and lit.
Status displays
On: Filter control enabled on the camera side
Off: Filter control enabled on the ROP (this unit) side
When this button is lit, [ECC] > [COLOR TEMP SW] in the ROP menu can be enabled or dis-
abled.
"Color temperature (ECC)" (see page 41)
Status displays
On: ECC operation ([COLOR TEMP SW] enabled)
Off: CC filter operation ([COLOR TEMP SW] disabled)
- 25 -
10
Parts and their functions