Panasonic AK-HRP1000G Operating Instructions Manual page 29

5 [DTL] dial
6 [CAM SEL] indicator
7 [SELECT] dial
8 [TEMP] indicator
9 [SYNC] indicator
10 [MFLR] indicator
11 [USER] indicator
Use this dial to adjust the detail level.
The setting values can be viewed in the [DTL] area of the LCD panel (status screen). You can
configure whether to perform [DTL] adjustment for UHD, HD, or SD under [ROP SETTING] >
[DTL VOL] of the ROP menu.
This is a target of the paint control lock (PAINT LOCK).
This indicator is lit in camera selection mode.
Status displays
On: Camera selection mode
Off: Camera selection mode canceled
Use this dial to select and adjust any of [TEMP], [CAM SEL], [SYNC], [USER], and [MFLR].
The setting values can be viewed in the [TEMP] area of the LCD panel (status screen).
Depending on the selected property, the [TEMP] area will appear as the [USER], [SYNC],
[B.GAM], or [M.FLR] area.
For the operating procedure, see the following page.
"[SELECT] dial" (see page 47)
This indicator lights when [TEMP] is selected with the [SELECT] dial.
"[SELECT] dial" (see page 47)
This indicator lights when [SYNC] is selected with the [SELECT] dial.
"[SELECT] dial" (see page 47)
This indicator lights when [MFLR] is selected with the [SELECT] dial.
"[SELECT] dial" (see page 47)
This indicator lights when [USER] is selected with the [SELECT] dial.
"[SELECT] dial" (see page 47)
- 29 -
Parts and their functions