9.3 Changing the Signal Output Contacts During Irradiation
The busy signal can be changed from contact a output (initial setting) to contact b output.
To display the Busy Signal Change screen, touch MENU → SETTING → BUSY SIG.
9.4 Switching the UI Language
You can toggle the touch-panel UI language (Japanese/English/Chinese (simplified)/ Korean).
To switch the language, press MENU → SETTING → LANGUAGE.
1
Touch A CONTACT or B CONTACT.
The touched setting is selected (inverted display).
2
Touch BACK to return to the Setup screen.
1
Change the UI language by touching the language you
desire.
2
Touch BACK to return to the Setup screen.
Configuration
25