Quick start-up 19
Quick start-up
About this chapter
This chapter includes the basic information about the mechanical and electrical installation
of solar pump inverter and also provides steps to quickly operate the inverter.
For general instructions on installation and maintenance of ACS355 Drives, see ACS355
User's manual (3AUA0000066143 [English]).
Safety instructions
WARNING! All electrical installation and maintenance work on the inverter must
be carried out by qualified electricians only. Follow the safety instructions listed
below.
•
Never work on the inverter, the braking chopper circuit, the motor cable or the motor
when input power is applied to the inverter.
•
After disconnecting the input power, always wait for 5 minutes to let the intermediate
circuit capacitors discharge. Always ensure by measuring that no voltage is actually
present.
•
A rotating permanent magnet motor generates a dangerous voltage. Always ensure to
lock the motor shaft mechanically before connecting a permanent magnet motor to the
inverter, and before doing any work on an inverter system connected to a permanent
magnet motor.
4