Edit Setup - Siemens SIREC D200 Manual

Edit Setup

(Main Menu > Configure > Setup > Edit Setup)
Edit Setup will access the main configuration of the recorder through further sub-menus for:
Field IO, Pens, Comms, Events/Counters, General, Screen and Recording set up.
The Edit button may display a warning message if the Commit Later option has been select-
ed This means changes to the configuration have been made but the changes have not
been committed to the recorder.
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
Power up
Select a button to take you to the next menu
• Field IO - This button displays a sub menu containing Analogue In, Analogue Out,
Alarm/Digital IO and Pulse Inputs card menus.
• Pens - This button displays all the configuration areas for setting up Pens including
Scales, Maths, Alarms, Logging and Totalisers.
• Comms - This button displays Services, TCP/IP and Network Admin. Services takes
you to a sub menu containing Modbus, Web, Email, SNTP, FTP and Peers menus.
See "Comms Services Menu" on page 73.
• Events/Counters - Events and counters are firmware options that can be activated
using the credit system. Events are certain conditions or operations which can be set up
and logged according to the time and date of the occurrence.
on page 79.
User Counters can be set up and used as a Cause or Effect in the
Events system to count an occurrence.
• General - This button displays a sub menu containing general recorder information
including recorder Ident, Localisation, Factory, Batch, Printer set up and Groups (Pens)
See "General Menu" on page 90.
menus.
• Screen - This button displays a sub menu containing Screen Saver, Chart speed and
screen Brightness set up.
• Recording - Set up Scheduled recording and specify the Storage Bias for recording
"Edit Recording" on page 101.
logged and chart data.
See "Commit Later" on page 140.
See "Field IO Menu" on page 50.
See "Pens Menu" on page 62.
See "Counters Menu" on page 89.
See "Screen Saver" on page 100.
See "Events Menu"
49