Table of Contents
Advertisement
When the configuration is complete select the Finish button to Commit, Discard or Commit
Later. Select the Back button to return to the previous menu.
(Configure > Setup > Edit Setup> General > Factory > Credits)
The Credit menu contains the Serial No. of the recorder, how may credits are available, dis-
plays the Options Code and lists what Firmware Options are currently active.
(Configure > Setup > Edit Setup> General > Factory > FW Upgrade
The Firmware Upgrade button allows new versions of the recorder firmware to be loaded
into the recorder via a USB key or a Compact Flash card. The file type required to upgrade
the Firmware has the file extension .xsu. Contact SIEMENS for more information. Insert the
Compact Flash or USB key with the latest revision of Firmware (.xsu file format) and press
the FW Upgrade button. The recorder will scan and check the files on the external device
with the current version running in the recorder. Any later version files on the external device
are copied into the recorder.
If there is no external media fitted or the file is corrupt a Firmware installation dialog will ap-
pear. If this occurs check the file is the correct format (.xsu). Secondly download the file to
another Compact flash card or USB key.
See "Storage Media Format" on page 120
cards and USB keys. Compact Flash not available
To check the firmware upgrade has been successful, see the Status Menu,
page 128.
92
• FW Upgrade - The Firmware Upgrade button allows new versions of the recorder
firmware to be loaded into the recorder.
• Calibration - Analogue In and CJC Calibration can be performed per slot (card).
"Calibration" on page 93
• Demo Traces - A set of demo traces are available for demonstration or simulation pur-
See "Demo Traces" on page 96
poses.
• Reset Setup - Select this to clear the current setup. A Warning message will appear
before activating the reset.
• Delete All Data - This button will delete all data from the internal memory. A Warning
message will appear before data is deleted.
Credits
• Serial No. - read only and cannot be edited.
• Credits - read only and cannot be edited. It displays the number of Credits available to
activate additional firmware functionality.
• Options Code - The Options code is a unique coded number for this recorder that con-
tains information that enables certain functionality including the total credit value.
• Options - This displays how many credits are currently in use. Select this to produce a
list of Firmware options available and their credit values. Toggle each option On or Off
to enable the feature within the recorder. If there are not enough credits available. More
credits are available from your supplier. For a complete lists of all the firmware options
and their functionality see
FW Upgrade
Power up
See "FW Upgrade" on page 92
See "Reset Setup" on page 96.
See "Delete All Data" on page 96.
Table 7.1, "Firmware Options," on page 167
for formatting information of Compact Flash
for the
SIREC D200
.
"General" on
43-TV-25-35 GLO Iss.4 Dec 06 UK
A5E01001767-04
See
Advertisement
Table of Contents
