MITSUBISHI CNC
3. Installation
Removal
(1) Remove the module fixing screws.
(2) Hold the module with both hands, and push the hook on the top of the module with a finger
until it stops.
(3) While pushing the hook, and using the bottom of the module as a support, pull the module
toward you.
(4) Lift the module upwards and remove the module fixing hook from the module fixing hole.
62
(A)
(B)
(C)
(D)
(A) Module fixing hook
(B) Base unit
(C) Module connector
(D) Module fixing hole
(E) Module
(E)