Table of Contents
Advertisement
Figure 8. Chassis Installed in a 4-Post Rack
Using Dell ReadyRails (Optional)
Dell Networking offers the Dell ReadyRails rack mounting system as an option to ease the installation of a
switch in a 2-post or 4-post rack. You must purchase a ReadyRails kit as a separate item; it is not shipped
with the C9010 switch.
You can install Read Rails using a tool-less method in a non-threaded-hole rack or a tooled method in a
threaded-hole rack. Dell ReadyRails support a rack length of 24 to 30 inches. The ReadyRails kit consists
of:
•
Chassis rails for the left and right sides of the C9010 chassis (items 1 and 2 in Figure 9)
•
Left and right rail brackets that fit into the front rails on 2-post racks (items 3 and 4 in Figure 9)
•
Front rails for the left and right posts of 2- and 4-post racks (items 5 and 6 in Figure 9)
•
Rear rails that fit into the left and right front rails on 4-post racks (items 7 and 8 in Figure 9)
14
Installing the Hardware
Advertisement
Table of Contents
