LED
SFP+ 10G uplink port 0 to 3:
Link/Activity LED
RJ45 Management Ethernet
port: Link LED
RJ45 Management Ethernet
port: Activity Status LED
Figure 27. 40G QSFP+ Port LEDs
1.
4x10G Link/Activity Port LEDs above each 40G
QSFP+ port
Table 3. 40GE QSFP+ Port LEDs
LED
40GE Port link/activity
LED
36
LED Color
•
Off
•
Solid green
•
Flashing green
•
Solid amber
•
Flashing amber
•
Flashing amber (1
second on, 1 second
off
•
Off
•
Solid green
•
•
Solid amber
•
Off
•
Flashing green
LED Color
Description
•
Off
•
•
Solid green
•
•
Flashing green
•
•
Solid amber
•
•
Flashing amber
•
Flashing amber (1
•
second on, 1
second off
Description
•
No data link
•
Link is up and operational.
•
Link is up and transmitting/receiving data.
•
1G port is up and the interface is enabled.
•
1G port is transmitting/receiving data.
•
Port beacon used to locate SFP+ port
•
No data link
•
Link is up and operating at maximum port
speed; if auto-negotiated, port is
operating at 1G.
•
Link is up and operating at lower speed; if
auto-negotiated, port is operating at
10/100M.
•
No data link activity
•
Link is up and transmitting/receiving data.
2.
Module Status LED
No link or interface is disabled.
40G link is up and 40GE QSFP+ interface is enabled.
40GE port is transmitting/receiving data at
maximum 40G speed.
40G link is up but operating at lower speed (less
than 40G).
40GE port is transmitting/receiving data at a lower
speed (less than 40G).
Installing the Hardware