Troubleshooting / Frequently Asked Questions - Silvercrest SBB 850 D1 Operating Instructions And Safety Instructions

Hide thumbs Also See for SBB 850 D1:
Table of Contents

Advertisement

Available languages

Available languages

Clean the inside of the baking tin (8) with warm water, a little mild detergent and a washing-up
brush. For stubborn deposits, fill the baking tin (8) with warm water and add mild detergent.
Wait until the deposits have dissolved and you can remove them with a washing-up brush.
After cleaning, rinse the baking tin (8) with plenty of clear water to remove detergent residue
and then dry it thoroughly.
Please clean the measuring cup (9), measuring spoon (10) and dough hook remover (11) with
warm water and a little mild detergent. Dry these parts thoroughly after rinsing them with clear
water.
There may be slight discolourations of the surface over time due to heat, moisture or
steam. This is normal and does not constitute an impairment of its functions or a
reduction in quality in the sense of the warranty terms and conditions.

14. Troubleshooting / Frequently asked questions

 Display indicates "H:HH"
Problem: A programme was started although the automatic bread maker had not cooled down
enough since the last baking process.
Solution: Stop the programme and switch off the main switch (5). Let the automatic bread maker
cool down with its cover (2) open for 20-30 minutes.
 Programme does not start and display
Problem: The automatic bread maker has not cooled down enough since the last baking process.
Solution: Let the automatic bread maker cool down with its cover (2) open for 20-30 minutes.
 Display indicates "E:E0" after programme starts
Solution: Switch off the main switch (5) and disconnect the mains plug. Then insert the mains plug
again and switch on the main switch (5). If the error message is still displayed, please contact
Customer Service.
 The dough hook (7) is stuck in the baking tin (8) after baking
Solution: Fill the baking tin (8) with hot water and turn the dough hook (7) so that the deposits can
dissolve.
 The dough hook (7) is stuck in the bread after baking
Solution: Remove the dough hook (7) with the dough hook remover (11).
 The motor turns, but the dough is not mixed
Solution: Check whether the baking tin (8) and dough hooks (7) are locked into place correctly.
 Automatic bread maker crushes fruit and nuts
Solution: Only add ingredients such as fruit and nuts to the dough when the beep sounds and
"ADD"
is indicated on the display
jumps to programme 1
.
SilverCrest SBB 850 D1
English - 53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents