Siemens SIMATIC PG 720 P Manual page 84

Configuring the PG 720
Documenting Your If you have made any modifications to your standard SETUP settings, you can
Device
enter them in the following table. You can then refer to these entries if you need
Configuration
to make any hardware modifications later.
Note
Print the following table out and keep the pages in a safe place once you
have filled in your entries.
System Parameter
Main
System Time
System Date
Diskette A
IDE Adapter 0 Master
IDE Adapter 0 Slave
Video System
Memory Cache
Cache system BIOS area
Cache video BIOS area
Boot sequence
Boot sequence
SETUP prompt
POST errors
Floppy check
Summary Screen
Numlock
Numlock
Key click
Keyboard auto-repeat time
Keyboard auto-repeat delay
Hardware Options
Configure MPI address range
PCMCIA Slot
Internal COM1
Internal COM2
Internal LPT1
LPT Mode
CRT/LCD selection
CRT 640 x 480
CRT 800 x 600
CRT 1024 x 768
LCD Screensize
Trackball / PS2 Mouse
6-20
Standard Settings
1.44 MB, 31/2
C: 1.440 MB
None
EGA/VGA
Enabled
Enabled
A: then C:
Enabled
Enabled
Enabled
Enabled
Off
Disabled
30/s
1/2s
Address CC00
Enabled
3F8, IRQ 4
2F8, IRQ 3
378, IRQ 7
Output Only
SIMULTAN
75
75
75
Expanded
External
Your Entries
PG 720 P Programming Device
C79000-G7076-C721-02