Refresh Camera List - ABB 83342-500 Operating Instructions Manual

Operating Instructions
ABB-Welcome Configuration for IP Gateway
Activation of relay actuator during call
If allow to activate the relay during call, there will be a icon on the screen during communication
6.5.2

Refresh camera list

Fig. 21: "Add device" refresh camera list
If the cameras belong to indoor station, after set the indoor station address in "Basic settings ", the associated
camera lists will be got automatically by pressing "refresh camera list" in " Device settings" . User can modify the
camera names or delete a camera list optionally.
And this lists will be synchronized by APP too.
For example:
Precondition: A camera interface in Mode 4, 4 cameras, working associated with IS 001. IS 001 can surveil
camera 01, camera 02, camera 03, camera 04.
Add a IP-Gateway together with IS 001, after register the APP, the camera lists(camera 01, camera 02, camera
03, camera 04) will shown in the APP automatically, and user can sueveil these cameras by APP.
— 29 —