ABB 83342-500 Operating Instructions Manual page 43

Operating Instructions
ABB-Welcome
4. Select a Telephone Gateway device in the list, and input the password. Default password:1234.
Fig. 35
5. If the password is correct, it will display as follows:
Fig. 36
No. Function
1 Click "Edit" to change the password, all passwords are 4 digits and plain code
2 Installer can select "Enable" or "Disable" for Direct-accept from the list
3 Installer can Enable/Disable "Call Divert for All Indoor Stations"
4 This Admin Password is used when user logins TGW
5 Installer can edit Default Phone Number directly with maximum 16 digits
6 Installer can Enable/Disable "Indoor Station PIN Active for all Indoor Stations"
7 All Indoor Station numbers are listed from 1 to 250
8 Installer can select "Yes" or "No" from "Existed" according to actual installation
a.
b.
9 Installer can select "Enable" or "Disable" from "Indoor Station PIN Active"
10 Installer can select "Default" or "Primary" or "Secondary" from "Call Divert Number Active"
11 Installer can edit Primary and Secondary Phone Number, with maximum phone number is 16 digits
12 Installer can edit Indoor Station PIN, PIN is 4 digits and plain code
13 Click "Export", all current parameters of the Telephone Gateway are exported to *.txt. If the installer did
modification but didn't click "Send", then click "Export", the original parameters are exported.
If "Yes" is selected, all parameters on its right can be edited
If "No" is selected, all parameters on its right is deleted, which means this Indoor Station is deleted
from the Indoor Station address.
Configuration for Telephone
Gateway
— 43 —