Basic Settings" Configuration Page - ABB 83342-500 Operating Instructions Manual

Operating Instructions
ABB-Welcome
6.3

"Basic settings" configuration page

Pos: 40 /#Neustruktur#/Online-Dokumentation (+KNX)/Bedienung/Türkommunikation/Busch-Welcome/Menü Grundeinstellungen - 83341 @ 35\mod_1363612329100_15.docx @ 288694 @ 23333333333311112211111111211111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111111232223322222222222222 @ 1
Fig. 14: "Basic settings" configuration page
You can adjust the basic settings for the IP gateway on the "Basic settings" configuration page.
Address of the indoor station
The address of the indoor station indicates which call button on the outdoor station is used to control the IP
gateway.
Note
Up to 4 terminal devices, including smart phone, Tablet and Busch-ComfortTouch
connected with one IP-Gateway inside one apartment.
Default outdoor station
The address of the default outdoor station is the station set as the preferred outdoor station. One audio and video
connection also without incoming door call can be set up for this station.
Master / slave mode
When more than one indoor station is installed in the apartment (same addresses), one station must be
configured as master and others as slave.
os: 41 /#Neustruktur#/Online-Dokumentation (+KNX)/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenumbruch ++++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ 22222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222121112222222222222121112222222222222222222222232223322222222222222 @ 1
Configuration for IP Gateway
®
, can be
— 23 —