Basic Settings" Configuration Page - ABB 83342-500 Operating Instructions Manual

Operating Instructions
®
ABB Welcome
6.3

"Basic settings" configuration page

Fig. 9: "Basic settings" configuration page
You can adjust the basic settings for the IP-Gateway on the "Basic settings" configuration page.
Address of the indoor station
The address of the indoor station indicates which call button on the outdoor station is used to control the IP-Gateway.
Note
Up to four terminal devices, including smart phone, tablet and Busch-ComfortTouch
connected with one IP-Gateway inside one apartment.
Default outdoor station
The address of the default outdoor station is the station set as the preferred outdoor station. One audio and video
connection also without incoming door call can be set up for this station.
Master and slave mode
When more than one indoor station is installed in the apartment (same address), one station must be configured as
master and all others as slaves.
Default Light Address
The address of the light indicates the address of switch actuator (M2305)
Note
Switch actuator (M2305) must work on "Time relay mode," and a light or a lock can be connected
with it. You can control this light or lock with the
details about the switch actuator, please refer to the M2305 user manual.)
button on the Welcome App interface. (For
® , can be
— 19 —