Operating Instructions
®
ABB Welcome
9
Network security
This product is designed to be connected to and to communicate information and data via a network interface.
It is your sole responsibility to provide and continuously ensure a secure connection between the product and
the network. You shall establish and maintain any appropriate measures (such as, but not limited to, the
installation of firewalls, application of authentication measures, encryption of data, installation of anti-virus
programs, etc.) to protect the product, the network, its system and the interface against any kind of security
breaches, unauthorized access, interference, intrusion, leakage and/or theft of data or information. ABB and its
entities are not liable for damages and/or losses related to such security breaches, any unauthorized access,
interference, intrusion, leakage and/or theft of data or information.
10
Integrating a Busch-ComfortTouch
Fig. 32: Integrating Busch-ComfortTouch
The Busch-ComfortTouch
Gateway.
1. Create a user, e.g., ComfortTouch1, in the IP-Gateway. See section "Create new user."
2. Create a configuration project in IPP 3.x for the Busch-ComfortTouch
3. Enter the "IP-Gateway address" and user in the "IP-Gateway" tab.
Note ...
A detailed user description is available in the IPP online help.
®
3.0 or higher
®
series 3.0 or higher can be connected to a Busch-Welcome
®
3.0 or higher
®
system directly via the IP-
®
, a "Door Entry" application page.
— 41 —