Ntp Settings" Configuration Page - ABB 83342-500 Operating Instructions Manual

Operating Instructions
®
ABB Welcome
Note
In case of a fixed IP address, there is the possibility that the device has obtained a new address
via DHCP after the software update.
For a new assignment of the IP address, please observe the details in chapter 5 of the IP-Gateway
manual.
6.12

"NTP settings" configuration page

P
Fig. 20: "NTP settings" configuration page
The NTP (Network Time Protocol) settings are used to define with which time signal the IP-Gateway is synchronized.
There are two options for synchronization:
Synchronization via the Internet
1. Select the Internet time (NTP) setting.
2. Add an NTP server.
Five NTP servers will be connected automatically one by one.
pool.ntp.org (default server)
time.nist.gov
ntp.Apple.com
time.windows.com
time-a.nist.gov
3. Set the time zone for your location.
4. Save your entries.
Note
In order to synchronize sucessfully, please make sure the Internet connection is available before
power on.
Synchronization via Busch-ComfortTouch
1. Select the setting from the App or Busch-ComfortTouch
The IP-Gateway takes its time settings from the panel or from a mobile end device.
®
3.x or by mobile device
®
3.x.
— 33 —