Associated Comforttouch 2.X" Configuration Page - ABB 83342-500 Operating Instructions Manual

Operating Instructions
®
ABB Welcome
6.8

"Associated ComfortTouch 2.x" configuration page

Fig. 15: "Associated Busch-ComfortTouch
The IP-Gateway can be used to control Busch-ComfortTouch
be version 2.4 or higher.
1. Create a user, e.g., ComfortTouch1.
2. Set the compatibility mode to "Yes."
3. Enter the IP address of the Busch-ComfortTouch
4. Create a configuration project in IPP 2.4 for the Busch-ComfortTouch
5. Enter the IP address of the IP-Gateway in the "Outdoor station" tab in the "Outdoor station IP address" menu box.
6. Enter the address of the outdoor station.
Note
If you want to remove a Busch-ComfortTouch
system, simply set compatibility mode to "No." The address does not have to be deleted.
® 2.x" configuration page
®
®
in the "ComfortTouch 2.x address" field.
® 2.x that is already connected to the Welcome
series 2.x. The Busch-ComfortTouch
® , "Door communication" application page.
® firmware must
— 27 —