Ethernet; Wireless Network - ABB ARR600 User Manual

Section 3
Physical connections
3.1.2
3.1.3
18
PIN
6
7
8
9

Ethernet

The device has an RJ-45 connector for 10/100 Mbps Ethernet connection. The
maximum length of the Ethernet cable is 100 m.
GUID-B51827C7-18A7-4713-9E56-6DECBFE71428 V1 EN-US
Figure 8: Ethernet connector
Table 9: Ethernet port configuration
Description
Number of ports
Speed
Duplex
Auto-negotiation
Recommended cabling

Wireless network

The device supports cellular connectivity (2G, 3G, LTE) allowing the use of
wireless applications. The practical data transfer rates depend on the subscription
details and wireless network capacity.
The device with wireless interface includes an SMA female type connector for an
external antenna. Any kind of external 50 Ω wide band antenna can be used
intended for GPRS, 3G or LTE frequency bands. The antenna is connected directly
to the connector located on the device's back panel.
Commercially available antennas are usually provided with a flexible 50 Ω cable
with a length of 2...3 meters and a male type SMA connector.
RS-422 full-duplex (4-wire)
-
TXD positive (out)
RXD negative (in)
-
Value
1
10Base-T, 100Base-TX
Half and full duplex
Yes
Cat5e or better
1MRS758458 F
RS-485 half-duplex (2-wire)
-
TXD/RXD positive (out/in)
-
-
ARR600
User Manual