Mitsubishi Electric Melsec QJ71LP21 Reference Manual page 115

4 SETUP AND PROCEDURES BEFORE STARTING THE OPERATION
Screw location
Edge width (L)
Edge thickness (W)
4 - 9
(7) Use drivers, which match the following recommended driver dimensions, for the
operation of the station number setting switch and the mode setting switch. Using
drivers with unsuitable edge width or thickness may damage the switches.
Tightening torque range
2.0 to 2.4 mm
0.5 to 0.6 mm
MELSEC-Q
4 - 9