Mitsubishi Electric Melsec QJ71LP21 Reference Manual page 50

2 SYSTEM CONFIGURATION
Target station
Target station CPU type
No. ((S1)+5)
((S1)+3) setting
setting
Multiple CPU system
No.1 (03E0
Group
Multiple CPU system
specification
No.2 (03E1
(81 to A0 ) or
H H
Multiple CPU system
All stations
No.3 (03E2
(FF )
H
Multiple CPU system
No.4 (03E3
2 - 15
(5) Precautions for executing a link dedicated instruction to a multiple CPU system
(Group specification, All stations)
If a WRITE/SWRITE, REQ, RRUN/RSTOP or RTMWR instruction is issued
under the following conditions (a), it may not be executed on some stations
depending on the system configuration (Control CPU setting) of the target
multiple CPU system. (Refer to (b).)
(a) Execution conditions
Target station CPU type ((S1)+3) setting
Target station No. ((S1)+5) setting
(b) Execution result
Execution result
Target station's
control CPU is No.1
)
H
)
H
)
H
)
H
O : The instruction is executed.
X : The instruction is not executed. Error completion is not identified on the execution source.
Item
Set the CPU type to any of the following.
• Multiple CPU system No.1 (03E0
• Multiple CPU system No.2 (03E1
• Multiple CPU system No.3 (03E2
• Multiple CPU system No.4 (03E3
Set the station No. of the target station to either of
the following.
• Group specification (81
• All stations (FF
Target station's
control CPU is No.2
MELSEC-Q
Setting
to A0 )
H H
)
H
Target station's Target station's
control CPU is No.3 control CPU is No.4
)
H
)
H
)
H
)
H
2 - 15