8 Operation at Use of a PC
8.3 Configuration of the Device
8.3.3.1.4
LEDs
Default Settings and Setting Options of the LEDs
Table 8-5
LED
RUN
H1
H2
ERROR
Indication inverted
Parameterization of the LEDs
To change the outputs of the LEDs H1, H2, and ERROR, proceed as follows:
✧
In the navigation window, select the Operational parameters menu, then the Process connections
submenu and click LEDs.
Figure 8-32
150
LED Settings
Default Setting
Device ready
-none-
-none-
no
Configure Tab, LEDs Input/Output Window
Setting Options
Not settable
Acc. to list box
(see chapter 15)
Errors are signaled as parameterized (only
error indications can be parameterized).
Acc. to list box
(see chapter 15)
no
yes
SICAM Q100, 7KG95xx, Device Manual
E50417-H1040-C522-A4, Edition 03.2018