7.
Tighten the nut on the throttle spring until the
spring is fully compressed, then back off 1/2 turn
(Figure
12).
Important:
When operating at high idle the
throttle lever should not move; if it moves,
tighten the nut on the throttle spring slightly.
Figure 12
1. Bolt
2. Flat washer
3. Friction washer
4. Throttle lever
8.
Attach the engine to the gearbox using the
previously removed nuts
9.
Tighten all of the engine mounting fasteners.
g274739
5. Friction washer
6. Throttle spring
7. Nut
(Figure
8).
10