Toro Greensmaster Flex 18 Installation Instructions Manual page 5

7. Remove and discard the console cover
3).
1. Brake lever grip
2. Bolt
8. Remove and discard the throttle-control cable
(Figure 4).
9. Remove and discard the throttle lever, but retain
the mounting hardware
1. Throttle-control cable
10. Remove the traction lever and traction cable
from the existing traction bracket
Keep all hardware.
Figure 3
3. Traction lever grip
4. Console cover
(Figure 4).
Figure 4
2. Throttle lever
(Figure
(Figure
1. Bolt
g029049
2. Reel lever pin
3. Bushing
4. Traction lever
5. Dowel pin
11. Remove the handle assembly from the traction
unit; refer to your traction unit Operator's
Manual.
12. Remove and discard the existing traction
bracket, but retain the proximity switch and
mounting hardware
Note:
directly from the handle; slide it off the bottom of
the handle assembly.
g029154
5).
1. Traction bracket
13. Remove the existing engine mounting bolts,
washers, and nuts.
14. Remove the engine from the traction unit.
5
Figure 5
6. Retaining ring
7. Reel lever
8. Traction cable
9. E-clip
10. Reel cable
(Figure 6).
The traction bracket cannot be removed
Figure 6
2. Proximity switch
g274782
g029158