Removing a board
► For long modules: Remove the front fan (see
► Open the casing (see
Board
► Disconnect the cables connected to the board.
a
1
3
► Fold the module lock (a) upwards to open it.
► Loosen the screw on the module (1), if one is fitted.
Modules in the PCI Express x16 slot are also secured at the bottom of the
slot with a locking latch (2). Push the latch to the side to release the card.
You can then remove the card as described below.
► Pull the slot cover out of the slot in the direction of the arrow (3).
► Place the board in suitable packaging.
Fujitsu
"Opening the casing", Page
2
"Removing and fitting the front fan", Page
35).
System expansions
69).
73