System expansions
Removing and installing hard disks in the lower
part of the device (variant: FUJITSU Workstation
CELSIUS W570power+, cold plug)
The following sections apply both to 3
The only difference between 2
is their EasyChange rails.
Removing the hard disk drive
In the cold-plug process, the cables connected at the back of the drive will be
disconnected automatically when the EasyChange rails are activated, as described below.
► Open the casing (see
► Press the brackets of the EasyChange rails on the hard disk drive in the direction of the
arrow (1) and pull the hard disk drive out of the drive cage in the direction of the arrow (2).
56
1
/
2
"Opening the casing", Page
1
2
1
/
inch hard disks and to 2
1
2
inch drives and 3
1
35).
/
inch hard disks.
1
2
/
inch drives
2
Fujitsu