System expansions
Do not throw away the slot cover. For cooling, protection against fire and in order to
comply with EMC regulations, you must refit the slot cover if you remove the board.
a
2
1
► Push the board into the slot (1).
► Secure the module with the screw (2), if one is fitted.
► Fold the module lock (a) back down to close it.
► If necessary, connect the cables to the board.
► For long modules: Install the front fan (see
► Close the casing (see
If you have installed or removed a board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board documentation.
72
"Removing and fitting the front fan", Page
"Closing the casing", Page
36).
69).
Fujitsu