Installing The Heat Sink - Fujitsu CELSIUS W570power Operating Manual

Installing the heat sink

► Open the casing (see
Install the heat sink again in the same way as it was fitted in the
device at the time of removal.
► Insert the heat sink into the casing (1). In doing so, correctly align the screw holes
on the heat sink with the screw holes on the mainboard.
► Fasten the screws (a).
► Connect the fan leads to the mainboard (FAN CPU).
► FUJITSU Workstation CELSIUS W570+ / W580power+: Insert the drive cage
into the casing (see
the drive cage (see
► Close the casing (see
Fujitsu
"Opening the casing", Page
1
"Slide the drive cage into the housing.", Page
"Close the drive cage", Page
"Closing the casing", Page
35).
a
40) and close
41).
36).
System expansions
79