Installing the heat sink
Requirements:
●
The device is removed from the rack (see section "Pulling out or removing the device from the
rack").
●
The casing is open (see section "Opening the device").
►
Install the heat sink so that the air flow is directed towards the casing rear panel (see arrow on
the heat sink).
Pay attention to the recessed area (A) on the processor heat sink, which is necessary in certain
configurations.
►
Press the heat sink downwards and secure it with four screws, tightening them diagonally.
►
Close the device (see section "Closing the device").
►
Install the device in the rack again (see section "Installing the device in the rack").
Fujitsu Technology Solutions
System expansion
97