Expansion Cards - Fujitsu Celsius C620 Operation Manual

System expansion

Expansion cards

CAUTION!
!
•
Internal cables or devices must not be damaged or altered. This could lead to damage
to the device, make a fire break out or cause an electric shock.
•
Some modules and components inside the device also remain hot after shut down.
After shutting down the device, wait until hot components have cooled before you
install or remove internal options.
•
Printed circuit boards and soldered components of the internal options are unprotected
and could be damaged by static electricity. You must always discharge any static
charge from your body (e.g. by touching a grounded object) before you change
electrostatic sensitive devices (ESDs).
•
Circuitry on boards or soldered components must not be touched. Hold the circuitry by
the metallic parts or the edges.
•
If devices are installed or dismantled by methods other than those described in this
section, the warranty becomes invalid.
Because of the two riser modules, the system offers one slot for a low profile board (1) and one slot
for a high profile board or graphics card (2).
1= Riser module 1 for low profile boards
(expansion card installed)
78
2= Graphics card carrier for high profile
boards
Fujitsu Technology Solutions