Shutting down the device
Shutting down the device
CAUTION!
!
Please follow the safety instructions in the "Important notes" section.
This step is only necessary if you perform an upgrade or change components.
i
►
Tell the system administrator that the device will be shut down and switched off line.
►
Stop and close all applications.
►
Shut down the device.
If there is an ACPI-compatible operating system deployed on the system, pressing the
i
ON/OFF button causes a controlled shutdown process or the device is put into standby
mode, depending on the setting.
Pay attention to the signaling of the power-on indicator, as described in the section
"Indicators on the device".
►
Switch on the ID indicator of the device, as described in the section "Identifying defective
devices".
36
Fujitsu Technology Solutions