Final Steps; Removing And Installing The Processor Heat Sink; Removing The Heat Sink - Fujitsu Celsius C620 Operation Manual

System expansion

Final steps

► Close the device (see section "Closing the device").
► Install the device in the rack again (see section "Installing the device in the rack").

Removing and installing the processor heat sink

Removing the heat sink

Requirements:
● The device is removed from the rack (see section "Pulling out or removing the device from the
rack").
● The casing is open (see section "Opening the device").
► Undo the screws on the heat sink (1).
► Lift the heat sink out of the casing (2).
You can now change the processor (see section "Changing the processor").
96 Fujitsu Technology Solutions