Table of Contents
Advertisement
System expansion
►
Undo the screws holding the drive in the drive cage.
►
Take the drive out of the drive cage.
►
If necessary, make the required settings on the remaining hard disk drives. If required, you
must adjust the entry for the drive in the BIOS Setup accordingly.
►
If you do not install an accessible drive, close off the open drive bay with the optional cover.
►
Close the device (see section "Closing the device").
►
Install the device in the rack again (see section "Installing the device in the rack").
56
Fujitsu Technology Solutions
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
