Performing System Configuration; Configuring The Onboard Sata Controller; Configuring The Sas/Sata Controller - Fujitsu Celsius C620 Operation Manual

Performing system configuration

This section contains information about configuring the device and installation of the operating
system.
While the system is operating, make certain that the energy saving functions are disabled
i
in the Power menu in the BIOS Setup (see section "Settings in BIOS Setup").

Configuring the onboard SATA controller

A 5-port SATA controller is integrated into the mainboard. Depending on the version, you can use up
to 4 non-accessible drives and one optical drive with it.
Additional information on configuration of the controller is given in the "BIOS Setup"
i
manual.
Descriptions of operating systems not covered in the controller manual are provided in the
i
appropriate readme files on the driver CDs.

Configuring the SAS/SATA controller

The device has an optional SAS/SATA RAID controller.
Depending on the version, you can use up to 4 non-accessible drives with it.
Further information on configuration of the optional RAID controller can be found in the
i
appropriate documentation on the "Drivers & Utilities" DVD or on the Internet at
http://ts.fujitsu.com/support.
Descriptions of operating systems not covered in the controller manual are provided in the
i
appropriate readme files on the driver CDs.
Fujitsu Technology Solutions
Performing system configuration
37