Siemens Sinamics S120 Getting Started page 37

With starter

Hide thumbs Also See for Sinamics S120:

Table of Contents

3. If the desired adapter is in the list, continue as described in point 6.

If the required adapter is not included in the list, you must add the appropriate entry. To

do so, click on the "Selection..." button.

The already installed interfaces are located in the window "Install/uninstall interfaces". If

the required interface is not present, you must install it yourself.

Image 5-3

4. Select the desired interface on the left-hand side, and then click on "Install-- > ".

The interface then changes to the right-hand side.

5. Select the required interface and close the window.

6. Click in the list box "Interface parameter assignment used:" on the interface parameter

assignment "TCP/IP -> Belkin F5D 5055 Gigabit USB 2.0 Network Adapter."

7. Close the "Set PG/PC interface" window by clicking "OK."

STARTER Getting Started

Getting Started, (GS1) 07/2016, 6SL3097-4AG00-0BP4

Selecting the interface

Creating a drive object

5.2 Setting the communication interfaces

Table of Contents