Table of Contents
Advertisement
Cleaning
Cleaning the Machine
Regular cleaning and washing will increase the life
span of the machine. Clean the machine after each
use, before the dirt hardens.
Ensure that the motor is unplugged.
Use care when using a high-pressure sprayer
because it can damage warning decals, instruction
signs, and the motor.
Important:
Use pressure sprayers to clean only
the drum of the machine. Clean off the rest of the
machine by hand to keep the motor from getting
wet.
Important:
Lubricate the trunnions after cleaning;
refer to
Lubricating the Bearings and Seals (page
26).
Storage
Storing the Machine
For storage over 30 days, prepare the machine as
follows:
1.
Move the O
/O
N
and unplug the power cord.
2.
Remove dirt and grime from the external parts
of the entire machine, especially the motor.
Important:
You can wash the machine with
mild detergent and water.
3.
Grease the machine; refer to
Bearings and Seals (page 26)
the Drive Chain (page
4.
Check and tighten all bolts, nuts, and screws.
Repair or replace any part that is damaged.
5.
Paint all scratched or bare metal surfaces with
paint from your Authorized Toro Dealer.
6.
Store the machine in a clean, dry garage or
storage area.
7.
Cover the machine to protect it and keep it clean.
35
switch to the O
position,
FF
FF
Lubricating the
and
Lubricating
28).
Advertisement
Table of Contents
