Toro MMX-650E-S Operator's Manual page 4

•
Never let children or untrained people operate or
service the equipment. Local regulations may
restrict the age of the operator.
•
The owner/user can prevent and is responsible
for accidents or injuries to people or damage to
property.
Towing
Check with your local county or state towing safety
regulations before towing the machine.
•
In order to reduce the possibility of an accident
while transporting the machine on public roads,
make sure the towing vehicle is mechanically
sound and in good operating condition.
•
Turn off the motor before transporting the machine.
•
When towing with a ball hitch, ensure that the ball
hitch you are using is the proper size for the hitch
coupler on the machine.
•
When towing with a pintle hitch, ensure that the
eye of the tow pole is the correct dimension for
the pintle hook.
•
Inspect the hitch and coupling for wear. Never tow
the machine with damaged or defective hitches,
couplings, chains, or other components.
•
Check the tire air pressure on the towing vehicle
and the machine.
•
Check the tire tread and sidewall for damage and
wear.
•
Properly attach the safety chains to the towing
vehicle.
•
Ensure that the directional and brake lights are
working properly (if the machine is equipped with
the light kit).
•
Ensure that the directional, backup, and brake
lights of the tow vehicle are working properly.
•
Before towing, check to make certain your
machine is correctly and securely attached to the
towing vehicle.
•
Ensure that the safety chains are properly secured
to the vehicle, and leave enough slack for turning.
•
Do not carry any material in the machine when
towing.
•
Avoid sudden stops and starts. This can cause
skidding, or jackknifing. Smooth, gradual starts
and stops will improve towing.
•
Avoid sharp turns to prevent rolling. Tow only with
a vehicle that has a hitch designed for towing. Do
not attach towed equipment except at the hitch
point.
•
Do not tow the machine faster than 88 km/h (55
mph).
•
Use caution when backing up; use a spotter
outside the vehicle to guide you.
•
Do not allow anyone to sit or ride on the machine.
Preparation
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
4