Table of Contents
Advertisement
BTS3900C (Ver.C)
Hardware Description
About This Chapter
The BTS3900C cables are the PGND cables, power cables, transmission cables, CPRI cables,
signal cables, and RF cables.
7.1 List of BTS3900C Cables
The BTS3900C cables are the PGND cables, power cables, transmission cables, CPRI cables,
signal cables, and RF cables.
7.2 Cable Outlets in a BTS3900C Cabinet
All cables for a BTS3900C cabinet are routed into and out of the cabinet through the cable outlets
at the bottom of the cabinet.
7.3 BTS3900C Cable Connections
This chapter describes the cable connections in the BTS3900C. The cable connections vary
according to the configurations of the cabinet.
7.4 PGND Cables
A PGND cable ensures that the cabinet and components in the cabinet are properly grounded
and that the base station runs properly. The maximum length of a PGND cable is 15 m (49.21
ft.).
7.5 Power Cables
This chapter describes all the power cables used in a BTS3900C.
7.6 BTS3900C Transmission Cables
This chapter describes all the transmission cables used in a BTS3900C, including the exteriors,
functions, and pin assignments of the transmission cables.
7.7 CPRI Fiber Optic Cable
CPRI fiber optic cables are classified into multimode fiber optic cables and single-mode fiber
optic cables. They transmit CPRI signals.
7.8 BTS3900C Signal Cables
This chapter describes all the signal cables used in a BTS3900C, including the exteriors,
functions, and pin assignments of the signal cables.
7.9 RRU RF Jumper
An RRU RF jumper connects an RRU and the feeder of the antenna system to transmit signals
between the base station and antenna system. A fixed-length RF jumper used by an RRU is 2 m
Issue 03 (2013-05-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7
BTS3900C Cables
7 BTS3900C Cables
120
Hide quick links:
Advertisement
Table of Contents
