Fe Surge Protection Transfer Cable - Huawei BTS3900C Hardware Description

BTS3900C (Ver.C)
Hardware Description
Pin on the RJ45
Connector
X1.8
X1.7

7.6.4 FE Surge Protection Transfer Cable

The FE surge protection transfer cable is used to connect the UFLP and the main control board.
It is an optional cable. The length of an FE surge protection transfer cable is 0.8 m (2.62 ft).
Exterior
The FE surge protection transfer cable has an RJ45 connector at each end, as shown in
7-28.
Figure 7-28 FE surge protection transfer cable
(1) RJ45 connector
Pin Assignment
Table 7-32
Table 7-32 Pin assignment for the wires of the FE surge protection transfer cable
Pin on the RJ45
Connector
X1.2
X1.1
X1.6
X1.3
X1.4
X1.5
X1.8
Issue 03 (2013-05-27)
Wire Color
Brown
White and
brown
describes the pin assignment for the wires of the FE surge protection transfer cable.
Wire Color
Orange
White
Green
White
Blue
White
Brown
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Wire Type Pin on the RJ45 Connector
Twisted pair X2.8
X2.7
Wire Type Pin on the RJ45 Connector
Twisted pair X2.2
X2.1
Twisted pair X2.6
X2.3
Twisted pair X2.4
X2.5
Twisted pair X2.8
7 BTS3900C Cables
Figure
158