Huawei PDU8000 User Manual page 20

PDU8000 UPS Power Distribution Cabinet
User Manual
Indicator
Tx/Rx
The home screen of the 8D controller displays status for the LN1 and LN2 power supplies,
generator, delay, and LLVD.




Figure 4-5 Status of the LN1 and LN2 power supplies
(1) LN1 power status
(3) LN1 power alarm ID
If LN1 and LN2 power indicators are hollow, there is an alarm. Locate the fault based on the alarm ID
and
Issue 01 (2016-03-04)
Figure 4-5 shows the power status of LN1 and LN2.
alarms.
Figure 4-6 shows the generator status.
Figure 4-7 shows the delay status.
Figure 4-8 shows the LLVD status.
Table 4-1 or the alarm ID description on the 8D controller, and rectify the fault.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
alarm status.
When the indicator is on, the
controller is transmitting
data.
(2) LN2 power status
(4) LN2 power alarm ID
4 Components
Remarks
rectify possible faults.
 On: The handle is
removed.
 Blinking: A switch logic
alarm has been
generated.
N/A
Table 4-1 describes the power status
14