● The device is attached to the wall with four screws, see Installing (Page 38).
● It has a door at the front which is closed with six screws.
● The door is fitted with a display
● There is space in the device for the installation of two analyzer modules AM2
● The power cable and Profinet/Ethernet cable glands
3.2.2
Nameplate layout
①
③
The nameplate with the order number and other important information is located on the left
of the housing exterior.
Wall-mounted device
Operating Instructions, 01/2013, A5E31930403-01
⑩
AM1
. The power supply unit
③
processing unit
in front of it.
⑧
signal cable glands
bottom of the device.
Order number
Development stage
①
and a keyboard
④
is located at the top on the rear panel with the
, and the purging gas connections (optional)
②
②
.
⑤
, the ground connection
⑦
are located on the
Serial number
Description
3.2 Design
⑨
and
⑥
, the
15