Figure B-1 Electrostatic Voltages Which An Operator Can Be Subjected To - Siemens SIPROCESS GA700 Operating Instructions Manual

ESD guidelines
B.1 ESD Guidelines
Electrostatic charging
Anyone who is not connected to the electrical potential of their surroundings can be
electrostatically charged.
The figure below shows the maximum electrostatic voltage which may build up on a person
coming into contact with the materials indicated. These values correspond to IEC 801-2
specifications.
Figure B-1
Basic protective measures against electrostatic discharge
● Ensure good equipotential bonding:
● Avoid direct contact:
86
Electrostatic voltages which an operator can be subjected to
When handling electrostatic sensitive devices, ensure that your body, the workplace and
packaging are grounded. This prevents electrostatic charge.
As a general rule, only touch electrostatic sensitive devices when this is unavoidable (e.g.
during maintenance work). Handle the modules without touching any chip pins or PCB
traces. In this way, the discharged energy can not affect the sensitive devices.
Discharge your body before you start taking any measurements on a module. Do so by
touching grounded metallic parts. Always use grounded measuring instruments.
Operating Instructions, 01/2013, A5E31930403-01
Wall-mounted device