Initial Use; Charging The Product - Silvercrest SSRA1 Manual

Use only the power cord supplied
with the product. The use of other
cords may result in the batteries
inside the product being charged.
Do not open or mutilate a battery
or cell. Electrolyte from the cell is
corrosive and can cause damage
to the eyes or skin. The cell contents
can also be hazardous if ingested.
Do not drop or subject the cell
or battery to strong mechanical
shock.
Batteries should not be disassem-
bled, crushed, punctured, or oth-
erwise mutilated. Such abuses
may result in leakage, fire, or
explosion.
Do not dispose of the battery
in a fire. Failure to observe this
precaution may result in an ex-
plosion.
Dispose of batteries properly and
in accordance with government
regulations.
Only for robot vacuum
cleaner
Store products with integrated
batteries or cells in a dry place
at room temperature. Batteries
are sensitive to high and low
temperatures. Such thermal ex-
posure may lead to leakage, fire,
or explosion.
12 US-EN
309029_1901__silv_Saugroboter SSRA1_content_US.indd 12
Do not open or mutilate products
with integrated batteries or cells.
Electrolyte from the cell is corro-
sive and can cause damage to
the eyes or skin. The cell contents
can also be hazardous if ingested.
Do not drop or subject products
with integrated batteries or cells
to strong mechanical shock.
Do not dispose of products with
integrated batteries or cells in a
fire. Failure to observe this precau-
tion may result in an explosion.
Dispose of products with integrated
batteries or cells properly and
in accordance with government
regulations.
SAVE THESE
INSTRUCTIONS

Initial use

Charging the product

Fully charge the product before using it for the
first time.
The charging time is 5 to 6 hours. The charging
process is also indicated in the display
Set up the charging dock
power cable .
4
Place the charging dock
Note: keep 3.28 ft (1 m) from the left / right
side and 6.56 ft (2 m) from the front clear.
Turn on the power switch
(position "–") before charging.
Place the product on the charging dock
line it up with the charging contacts
.
1
and connect the
2
flush against a wall.
2
on the product
9
and
2
.
3
11.09.19 08:26